http://www.ddknet.co.jp please acknowledge that the specifcation etc. of this catalog might change by the improvement etc. without notice. moreover, the characteristic and the specifcation of the published product are the reference values. please confrm the content with the latest delivery specifcations when you use the product. 27cp series 75 smb style coaxial connector 121226 measurement equipments, broadcasting, catv, hdtv applications 3 p ) 4 $ p n q m j b o u 3 p ) 4 $ p n q m j b o u item material / finish shell (body) copper alloy / ni or au plating contact (male) copper alloy / au plating contact (female) copper alloy / au plating insulator ptfe characteristic impedance 75 rated voltage 500vac(r.m.s.) dielectric withstanding voltage 1000v ac(r.m.s.)for1 minute insulation resistance 1000m mim. at 500v dc contact resistance 6m max. v.s.w.r. 1.5 max. at dc to 500mhz operating temperature -40 ? +85 specifications the specifcations are typical but may not apply to all connectors. please check the specifcations on each item with its drawing from us when you use. material/finish ? 27cp series is a smb connector which corresponding to 75 . ? low profle coaxial connector with push on lock mechanism. it is suitable to the applications of internal equipments. ? push-on locking mechanism provides quick and reliable connection. ?incompatible to 27dpseries(50 smb connector) feature frequency range dc to 500mhz 75 lock type push on characteristic impedance
unitmm http://www.ddknet.co.jp 27cp series 2 please acknowledge that the specifcation etc. of this catalog might change by the improvement etc. without notice. moreover, the characteristic and the specifcation of the published product are the reference values. please confrm the content with the latest delivery specifcations when you use the product. straight cable plug right angle cable plug part number applicable cable finish assembly instruction crimp tool outer conductor center conductor 27cp-p-1.5-cf 1.5c?2v ni au 1 cr-h-1100 27cp-p-1.5w-cf 1.5c?2w ni au cr-h-1100 27cp-p-2.5-cf 2.5c?2v ni au 1 cr-h-1100 part number applicable cable a l1 l2 finish assembly instruction crimp tool outer conductor center conductor 27cp-lp-1.5-cf 1.5c?2v 5.5 14.40 15.5 ni au 2 cr-h-1100 27cp-lp-1.5w-cf 1.5c?2w 5.5 14.35 15.5 ni au cr-h-1100 1.5c?2wx 27cp-lp-2.5w-cf 2.5c?2w 6.0 14.35 15.5 ni au cr-h-15285 27cp-lp-2.5-cf 2.5c?2v 5.5 14.40 15.5 ni au 2 cr-h-1100 straiught balkhead cable jack straiught bulkhead receptacle part number finish outer conductor center conductor 27cp-br-cf ni au part number applicable cable a l finish assembly instruction crimp tool outer conductor center conductor 27cp-bj-1.5-cf 1.5c?2v 5.5 17.10 ni au cr-h-1100 27cp-bj-1.5w-cf 1.5c?2w 5.5 17.07 ni au 1 cr-h-1100 27cp-bj-2.5-cf 2.5c?2v 5.5 17.10 ni au cr-h-1100 27cp-bj-2.5w-cf 2.5c?2w 6.0 17.00 ni au cr-h-15285 ? ? ? ? ? ? ? ? ? ? ? - " - " - ? ? ? ? ? ? ? ? ? ? ? ? - " - " - ? ? ? ? ? ? ? ? ? ? ? ? - " - " - ? ? ? ? ? ? ? ? ? ? ? ? - " - " - ? ? ? ? ? ? ? ? ? ? ? ? - " - " - ? panel mounting dimensions mounting panel thickness2.4mm max. mounting panel thickness2.4mm max. panel mounting dimensions
unitmm http://www.ddknet.co.jp 27cp series 3 please acknowledge that the specifcation etc. of this catalog might change by the improvement etc. without notice. moreover, the characteristic and the specifcation of the published product are the reference values. please confrm the content with the latest delivery specifcations when you use the product. right angle receptacle jack part number finish outer conductor center conductor 27cp-r-pc-cf ni au receptacle jack part number finish outer conductor center conductor 27cp-lr-pc-cf ni au ? ? ? ? ? ? ? ? ? ? ? - " - " - ? ? ? ? ? ? ? ? ? ? ? ? - " - " - ? ? ? ? ? ? ? ? ? ? ? ? - " - " - ? panel mounting dimensions panel mounting dimensions
unitmm http://www.ddknet.co.jp 27cp series 4 please acknowledge that the specifcation etc. of this catalog might change by the improvement etc. without notice. moreover, the characteristic and the specifcation of the published product are the reference values. please confrm the content with the latest delivery specifcations when you use the product. assembly instruction1 - " ' f s v m f ' f s v m f # $ # $ ) f b u t i s j o l b c m f u v c f 4 p m e f s j o h 4 b n f m f w f m ' j o j t i $ 7 $ 7 cut the cable as fg.1. the cable length require for the cable assembly l=l1+a+3 part number a 27cp-p-1.5-cf 6.4mm 27cp-p-2.5-cf 6.4mm 27cp-bj-1.5w-cf 8.0mm insert the ferule between outer conductor and sheath when the cable is 2.5c-2v. insert the ferule until ferule contacts with the sheath when the cable is 1.5c-2v. pick the outer conductor and turn down to the ferule. cut the extra outer conductor along the ferule. cut the center conductor as fg.3. please be careful to not damage the center conductor. pre-solder the center conductor. part number b c 27cp-p-1.5-cf 2.0mm 1.6mm 27cp-p-2.5-cf 2.0mm 1.6mm 27cp-bj-1.5w-cf 2.0mm 3.0mm insert the contact and solder from side hole. please be careful to not make gap between contact and center conductor of the cable and not damage the insulator by heat. when the solder is stick out, please shave the extra solder along the contact. insert the heat-shrinkable tube. insert the above contact into the body and crimp the root of the body as fg.5. cover the heat shrinkable tube on the root of the body and heat up.
unitmm http://www.ddknet.co.jp 27cp series 5 please acknowledge that the specifcation etc. of this catalog might change by the improvement etc. without notice. moreover, the characteristic and the specifcation of the published product are the reference values. please confrm the content with the latest delivery specifcations when you use the product. assembly instruction2 - ' f s v m f ' f s v m f 4 p m e f s j o h 3 f b s * o t v m b u p s ' s p o u * o t v m b u p s cut the cable as fg.1. the cable length require for the cable assembly l=l1+15+3 insert the ferule between outer conductor and sheath when the cable is 2.5c-2v. insert the ferule until ferule contacts with the sheath when the cable is 1.5c-2v. insert the boot into the cable and insert the center conductor into the body as fg.4. crimp the root of the body. insert the rear insulator into the center conductor. cut the center conductor in 1.6mm and pre- soldering. insert the contact and solder. insert the front insulator into the contact and twist in the interface. cover the heat-shrinkable tube and heat up. pick the outer conductor and turn down to the ferule. cut the extra outer conductor along the ferule. cut the center conductor as fg.3. please be careful to not damage the center conductor. pre-solder the center conductor.
|